Alright, for a while I've worked on many different sprites, from Digimon, to Zoids, and even a few pokemon, however, I've never had any requests done for the poke section of my work, so I have very few to present. I'm kind of new when it comes to the pokemon style, and at time's I'll use sprites from digimon to compensate for certain styles that I want. But enough on the rambling, I'd like to show you all the sprites that I do have.
Burstone, Bursteel, and Burstingon:
Lobright and Lumeistacian:
Nidokaiser:
Vectozaron:
Thundertoe: (yes, I know it's from a digimon sprite, but I turned it into a pokemon for a special evo-line in my fanmade pokedex)
This is really in a way all my first work, the others I've done were really bad in my opinion so I left them out, however, if you see anything that needs to be worked on in any of these, let me know and I'll attempt to work on them in my spare time.
As for requests I have very few rules:
1. My requests are for splicing and mixing of different pokemon sprites that exist. If you're looking for me to design a specific idea you have then don't be mad if it doesn't turn out right because I can only create from what I have.
2. When requesting make sure you try to choose pokemon that could actually fit together, because picking 3 or 4 different pokemon that have no parts that can fit together is quite ridiculous and may turn out as such. Example: Mixing a lower lvl/baby like togepi with a higher lvl/evolved such as charizard...sometimes it works, but most of the time it just looks too weird.
3. My usual limit is 3, but I may make exceptions for 4 or 5 if the pokemon chosen go well together, and I rarely will do 6, tried it once and it just looked all crazy. A good example of a mix of more than 3 would be the Burstone line from above: Nidoran male, Charmander, Totodile, Rhyhorn, and Gible lines were all put together in the same order and fashion.
4. Most importantly, I try to have fun with these, but I also have a busy life, so be mindful and respectful, as it may take some time for your request to get done. Requests of 2 pokemon may take less than an hour, but ones similar to Burstone may take a few days to complete.
PS: If you do make a request, and you don't specify a color you want me to use, then I will use my imagination to come up with the best color scheme I can think of for the design.
Edit: since I just made three new pokemon by splicing I thought I'd edit them into the very end of the post.
Dodi(Dodo + i - greek letter meaning one): (Pre-evo for Doduo)
Stardoll(Starfish + Dollar - as in a sand dollar): (Alt or Second evo for Staryu)
The webbed disk-like membranes that connect between Stardoll's points were actually done from scratch, color and all, while the gem and the outer-front plating came from Dialga.
Minacalf (Minature + Calf) - Male + Female: (The male is a prevo for Tauros and the female is a prevo for Miltank)
Burstone, Bursteel, and Burstingon:
Lobright and Lumeistacian:
Nidokaiser:
Vectozaron:
Thundertoe: (yes, I know it's from a digimon sprite, but I turned it into a pokemon for a special evo-line in my fanmade pokedex)
This is really in a way all my first work, the others I've done were really bad in my opinion so I left them out, however, if you see anything that needs to be worked on in any of these, let me know and I'll attempt to work on them in my spare time.
As for requests I have very few rules:
1. My requests are for splicing and mixing of different pokemon sprites that exist. If you're looking for me to design a specific idea you have then don't be mad if it doesn't turn out right because I can only create from what I have.
2. When requesting make sure you try to choose pokemon that could actually fit together, because picking 3 or 4 different pokemon that have no parts that can fit together is quite ridiculous and may turn out as such. Example: Mixing a lower lvl/baby like togepi with a higher lvl/evolved such as charizard...sometimes it works, but most of the time it just looks too weird.
3. My usual limit is 3, but I may make exceptions for 4 or 5 if the pokemon chosen go well together, and I rarely will do 6, tried it once and it just looked all crazy. A good example of a mix of more than 3 would be the Burstone line from above: Nidoran male, Charmander, Totodile, Rhyhorn, and Gible lines were all put together in the same order and fashion.
4. Most importantly, I try to have fun with these, but I also have a busy life, so be mindful and respectful, as it may take some time for your request to get done. Requests of 2 pokemon may take less than an hour, but ones similar to Burstone may take a few days to complete.
PS: If you do make a request, and you don't specify a color you want me to use, then I will use my imagination to come up with the best color scheme I can think of for the design.
Edit: since I just made three new pokemon by splicing I thought I'd edit them into the very end of the post.
Dodi(Dodo + i - greek letter meaning one): (Pre-evo for Doduo)
Stardoll(Starfish + Dollar - as in a sand dollar): (Alt or Second evo for Staryu)
The webbed disk-like membranes that connect between Stardoll's points were actually done from scratch, color and all, while the gem and the outer-front plating came from Dialga.
Minacalf (Minature + Calf) - Male + Female: (The male is a prevo for Tauros and the female is a prevo for Miltank)
These are looking great! Just remember, shading is your best friend. I can't exactly give you the best advice on it myself, since its a bit hard to explain, but if you kinda go with the flow and follow the example the previous sprite had when you use them, it should help, if not a tutorial from the internet.
